Virtual Joystick precisely mimics a real joystick controller
The Virtual Joystick is the easiest way to control your PTZ Cameras. With the program in VirJoy Mode, control the pan, tilt, zoom, and focus of your selected camera simply by clicking and dragging your computer mouse over the controls.
Control the camera's pan and tilt movements by clicking on the Virtual Joystick and moving the mouse in the direction where you want to move the camera. Control the Zoom and Focus by clicking on the Virtual Lever controls and moving your mouse up or down to Zoom/Focus IN and OUT.
Regulate the speed of the pan, tilt, and zoom movements by the movement of the computer mouse relative to the center point of the virtual controls - called the zero point, at which the speed is zero. The speed of pan and tilt movements is determined by the location of the mouse pointer relative to the center point of the virtual joystick; the speed of the zoom in and out movement is determined by the location of the mouse pointer relative to the center point of the zoom lever. The further away from the zero point of the virtual joystick or zoom lever that you move the mouse, the quicker the camera will move. The closer the mouse is to the zero point of the virtual joystick or zoom lever, the slower the camera will move.
Need to Control Your IP or VISCA PTZ Cameras?
Check out our line of professional PTZ Camera Controller Software products for IP or Serial port VISCA PTZ Cameras.
Need a USB to VISCA Control Cable? We also make PTZ Gear.
Check out our selection of Serial RS-232, Serial RS-422, and Serial RS-485 to USB Control Cable sets for both single and multi-camera configurations: