PTZJoy Controller HTTP Request Commands List

Rocosoft PTZJoy Controller HTTP Request Commands

Rocosoft PTZJoy PTZ Camera Controller allows for control of PTZ Cameras from external programs and keyboards using Macros and HTTP Requests. Here is a list of PTZJoy Controller HTTP Request Commands:

 

http://IP/PTZJoy=Left
http://IP/PTZJoy=Right
http://IP/PTZJoy=Up
http://IP/PTZJoy=Down
http://IP/PTZJoy=UpLeft
http://IP/PTZJoy=UpRight
http://IP/PTZJoy=DownLeft
http://IP/PTZJoy=DownRight
http://IP/PTZJoy=Stop
http://IP/PTZJoy=ZoomIn
http://IP/PTZJoy=ZoomOut
http://IP/PTZJoy=ZoomStop
http://IP/PTZJoy=FocusAuto
http://IP/PTZJoy=FocusNear
http://IP/PTZJoy=FocusFar
http://IP/PTZJoy=Home

http://IP/PTZJoy=PortDown
http://IP/PTZJoy=PortUp
http://IP/PTZJoy=Port1
http://IP/PTZJoy=Port2
http://IP/PTZJoy=Port3
http://IP/PTZJoy=Port4
http://IP/PTZJoy=Port5

http://IP/PTZJoy=CamNumUp
http://IP/PTZJoy=CamNumDown
http://IP/PTZJoy=Camera1
http://IP/PTZJoy=Camera2
http://IP/PTZJoy=Camera3
http://IP/PTZJoy=Camera4
http://IP/PTZJoy=Camera5
http://IP/PTZJoy=Camera6
http://IP/PTZJoy=Camera7
http://IP/PTZJoy=Camera8
http://IP/PTZJoy=Preset1 - PTZJoy=Preset32 - Preset Call. PTZJoy - 16 Internal and 16 External Presets, PTZJoy Pro, Studio - 32 Internal and 32 External Presets
http://IP/PTZJoy=IntPresets - Switch to Internal Presets.
http://IP/PTZJoy=ExtPresets - Switch to External Presets.
http://IP/PTZJoy=SetPreset - Save current Preset.

 

http://IP/PTZJoy=SetIntPreset=1 - SetIntPreset=32 - Specific Internal Preset Set. PTZJoy - 16 Internal Presets, PTZJoy Pro, Studio -32 Internal Presets
http://IP/PTZJoy=SetExtPreset=1 - SetExtPreset=32 - Specific External Preset Set. PTZJoy - 16 External Presets, PTZJoy Pro, Studio -32 External Presets

http://IP/PTZJoy=XJoyOn
http://IP/PTZJoy=XJoyOff
http://IP/PTZJoy=SlowJoy1
http://IP/PTZJoy=SlowJoy2
http://IP/PTZJoy=SlowJoy3
http://IP/PTZJoy=SlowJoyOff
http://IP/PTZJoy=SoftJoyOn
http://IP/PTZJoy=SoftJoyOff

http://IP/PTZJoy=TallyOn
http://IP/PTZJoy=TallyOff

Add the port number to the request if it's not Port80 (Port81 for example):
http://IP:81/PTZJoy=Left
http://IP:81/PTZJoy=Camera3
http://192.168.0.10:81/PTZJoy=Camera2
etc.

Using 127.0.0.1 or localhost on the same computer will work
and sometimes even more preferable:
http://localhost:81/PTZJoy=Left
http://127.0.0.1/PTZJoy=Camera3
etc.


 

Need to Control Your IP or VISCA PTZ Cameras? 

Check out our line of professional PTZ Camera Controller Software products for IP or Serial port VISCA PTZ Cameras.

IP PTZ Camera Controller Software

 

VISCA PTZ Camera Controller Software


 

Need a USB to VISCA Control Cable? We also make PTZ Gear.

Check out our selection of Serial RS-232, Serial RS-422, and Serial RS-485 to USB Control Cable sets for both single and multi-camera configurations: